Разпродажба!

HIGH-POWER DC Blocker Trap Filter – double US-type AC outlet

 348.00 Incl. VAT
 290.00 Excl. VAT

HIGH-POWER DC Blocker Assembled in a steel case with C14/C20 AC Inlet and double US-type AC Outlet

Описание

В днешно време електрозахранващата мрежа е сериозно "замърсена" от най-различни домакински уреди, индустриални консуматори на ел. енергия и т.н. Това може да доведе до разбръмчаване при тороидалните трансформатори (особено при по-големите). Предложеният DC трап (филтър, блокер) ще премахне или най-малкото ще намали това бръмчене.
Схемата на устройството е подобна на тази, използвана в добре познатият усилвател Lamm-1 на Владимир Шушурин. Статия със задълбочено обяснение как работят DC блокерите може да бъде намерена на сайта на Род Елиът (https://sound-au.com/articles/xfmr-dc.htm).

Here is offered device capable to handle VERY HIGH CURRENTS (up to 30 Amperes intrinsic current handling!!!) assembled in a steel case – black powder coated.

Because of such high currents using a standard PCBs is not possible. Instead of that a 2mm. thick pure copper bussbars are used to connect the filter’s parts.

In order to carry such high loads the part’s values are upraised with 4 x 47 000 uF capacitors, 25W power resistor etc. For further description of the High-Power DC Blocker see here: High-Power DC Blocker Unit

Note that the Blocker undergone a redesign and now it has 6 discrete diodes which allows it to block DC shifts up to 2V!

The capacitor block is firmly connected to the bottom of the case with brackets and rubber sheet.

The input AC connector is Schurter C20 IEC Inlet, capable to handle up to 20A AC current or Schurter C14 IEC inlet, capable to handle 10A.

There is one double Hubbel/Pass & Seymour US-style AC outlet (medical grade, gray color) located on the front panel along with the IEC AC Inlet.

The customer can chose between Schurter C20 or C14 IEC inlets.

There are 4 rubber feet on the bottom of the case which ensure that case will not scratch the underlying surface.

Dimensions of the unit: 18x22x14 cm. (WxDxH)
Unit’s weight: 3 kg.

Какво получава купувачът:
Пакетът ще съдържа 1 pcs. FULLY ASSEMBLED and tested HIGH-POWER DC trap/blocker/filter for toroidal transformers (toroids) in steel case.

Устройството се тракспортира в рамките на страната със СПИДИ, плащане с наложен платеж и опция за преглед преди плащането.

Submit your review
1
2
3
4
5
Submit
     
Cancel

Споделете отзив

HIGH-POWER DC Blocker Assembled in a steel case with C20 AC Inlet and double US-type AC Outlet
Усреднен рейтинг:  
 0 reviews

Допълнителна информация

Тегло 3.2 кг
AC Inlet

Schneider C20 IEC, Schneider C14 IEC